June 11, 2015
A fuel injector is a valve that delivers fuel to a vehicle’s engine. It has to deliver the precise amount of fuel, to precisely the right place, precisely when the engine needs it. The fuel also has to be mixed with air before it can burn in the engine.
Fuel injectors are engineered to spray fuel in a specific pattern into the engine. (The pattern varies by engine type and design.) In order to achieve these spray patterns, the fuel must be pressurized.
The pressure in a fuel injection system varies depending on its type. Many gasoline engines use port injection systems, which operate with a pressure of 60 pounds per square inch. Newer direct injection systems operate at 10 to 30 times that pressure. Some diesel passenger vehicles have fuel injectors that operate at 30,000 pounds or more per square inch.
Vehicles have one fuel injector for each cylinder in the engine. Your vehicle’s control computer constantly monitors the engine and various sensors in the vehicle and adjusts the fuel injectors accordingly so that they can deliver the proper amount of fuel to the engine. As you can see, fuel injectors are a sophisticated and vital part of your vehicle’s engine.
Because fuel injectors are such precision instruments, dirt and contaminants are a serious detriment to their performance. When an injector gets gummed up, it affects the pressure, pattern and timing of the fuel delivery. The result is a decrease in fuel efficiency and loss of engine performance.
So it’s important to keep your fuel injectors clean. That starts with keeping the fuel in your tank clean. High-quality fuel contains detergents and additives that help clean your engine. Brand-name Illinois fuel companies also deliver a more consistent quality of fuel than do bargain stations in the Chicago area.
The second way to keep your injectors clean is to keep your fuel filter clean. This filter screens dirt and rust out of the fuel as it travels from the tank to the engine. If the filter clogs up, fuel will bypass it and carry its load of dirt into the engine.
Check your owner’s manual or Tuffy Rockford in Loves Park to find out how often you should change your fuel filter. This should be part of your regular preventive maintenance. Also, remember that if you use bargain-brand or low-grade fuels, or if you drive an older vehicle, your filter will need to be changed more often.
You can also purchase cleaners that will protect your fuel injectors. These cleaners are added to the fuel tank. They work best at preventing build-up in your fuel injectors and can clean up small amounts of carbon, gum and varnish. But they won’t be able to clean a fully gummed-up injector. Read the labels before using any of these products for full directions on their use.
If your fuel injectors are gummed up, you can get a professional deep cleaning service at Tuffy Rockford in Loves Park that will result in better fuel economy and improved vehicle performance.
Good car care will prevent serious damage to your fuel injector system. And this is one system that you want to keep in perfect condition.
December 1, 2024
When the weather turns cold, it's nice to crank up the furnace and enjoy the heat. But if your home's furnace doesn't work, it's not too comfortable. Same goes with your vehicle. When the heater's not working, things can get miserable. It could also signal some major problems, which we'll discuss... More
November 24, 2024
For most drivers, at some point youre going to have a flat tire. Depending on how it was damaged, it may have to be replaced. But sometimes, a repair will do the trick, as long as the puncture isnt on the sidewall and the hole is smaller than inch/6.35mm in diameter. Here are the three common w... More
November 17, 2024
Engine air filters may not seem like a big deal, but when theyre clogged up with dirt, dust, and insects, your engine could wind up choking for air and not delivering you the power and performance it was designed to give. There are actually a couple of air filters in your vehicle. One filters th... More